| 李文博,倪自飞,姚利丽,周洁,王创造,安林.12.00R20轮胎缆型胎圈细观模拟与力学工况分析[J].轮胎工业,2025,(2):0080-0085 |
二维码（扫一下试试看！） |
| 12.00R20轮胎缆型胎圈细观模拟与力学工况分析 |
| Mesoscopic Simulation and Mechanical Condition Analysis of 12.00R20 Tire with Cable Bead |
| 投稿时间：2023-12-15 修订日期：2023-12-15 |
| DOI： |
| 中文关键词: 轮胎 缆型胎圈 细观模拟 有限元分析 |
| 英文关键词: tire cable bead mesoscopic simulation finite element analysis |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 269 |
| 全文下载次数: 168 |
| 中文摘要: |
| 采用Abaqus软件建立具有1×5（11＋17＋23）×1.80细观缆型胎圈结构的12.00R20轮胎有限元分析模型，对轮胎的充气和接地工况进行模拟和力学特性分析，并与简化胎圈模型的计算结果进行对比。结果表明：胎圈结构的简化会严重影响胎圈应力计算结果的准确性。考虑胎圈细观结构计算得到的应力更大，且应力呈现断点分布；轮胎接地工况下，胎圈最大应力随着负荷的增大而增大。 |
| 英文摘要: |
| Using Abaqus software，the finite element analysis model of 12.00R20 tire with 1×5＋（11＋17＋23）×1.80 mesoscopic cable bead structure was established to simulate and analyze the mechanical characteristics of tire under inflation and ground contact conditions，and the calculated results were compared with that of simplified bead model.The results showed that the simplification of bead structure would seriously affect the accuracy of calculation results of bead stress.While Considering the mesoscopic structure of the bead，the calculated stress was larger，and the stress distributed discontinuously.The maximum stress of the bead increased with the increase of tire under grounding contact condition. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
