| 冯强,李淼,王传铸,雍占福.子午线轮胎有限元分析平台的开发[J].轮胎工业,2024,44(8):0451-0457 |
二维码（扫一下试试看！） |
| 子午线轮胎有限元分析平台的开发 |
| Development of Finite Element Analysis Platform for Radial Tires |
| 投稿时间：2023-05-08 修订日期：2023-05-08 |
| DOI：10.12135/j.issn.1006-8171.2024.08.0451 |
| 中文关键词: 子午线轮胎 有限元分析平台 Python编程语言 Abaqus软件 二次开发 |
| 英文关键词: radial tire finite element analysis platform Python programming language Abaqus software secondary development |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 767 |
| 全文下载次数: 589 |
| 中文摘要: |
| 使用Python编程语言编写脚本，对轮胎在Abaqus软件中的有限元建模过程进行二次开发，搭建子午线轮胎有限元分析平台，将复杂的有限元建模过程参数化，并以11.00R20载重子午线轮胎为例对有限元建模过程进行验证。结果表明，二次开发的有限元分析平台在保证仿真精度的前提下，将原来需要1～2 h才能完成的轮胎有限元建模过程缩短至2 min左右即可完成，极大地提高了工作效率。有限元分析平台的搭建对于有限元分析在轮胎行业中应用的推广和轮胎性能的优化有着十分重要的意义。 |
| 英文摘要: |
| Using Python programming language to write scripts，secondary development on the finite element modeling process of tires in Abaqus software was performed，a radial tire finite element analysis platform was builded，the complex finite element modeling process was parameterized，and the finite element modeling process was validated by using 11.00R20 bus and truck radial tire as an example.The results showed that the secondary development of the finite element analysis platform shortened the tire finite element modeling process，which originally took 1～2 h to complete，now about 2 minutes while ensuring simulation accuracy，so that the work efficiency was greatly improved.The construction of a finite element analysis platform was of great significance for the promotion of application of finite element analysis in tire industry and the optimization of tire performance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
