| 王景天,王桂林,薛霖,孙钲,王君.一体成型与传统制样法阿克隆磨耗对比[J].轮胎工业,2024,44(12):0759-0763 |
二维码（扫一下试试看！） |
| 一体成型与传统制样法阿克隆磨耗对比 |
| Comparison of Akron Abrasion between Integrated Molding and Traditional Sampling Method |
| 投稿时间：2023-03-24 修订日期：2023-03-24 |
| DOI： |
| 中文关键词: 阿克隆磨耗 一体成型 传统制样 |
| 英文关键词: Akron abrasion integrated molding traditional sampling |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 154 |
| 全文下载次数: 59 |
| 中文摘要: |
| 采用一体成型与传统制样法制备两种阿克隆磨耗试样。通过改变试样硬度、胶轮轴与砂轮轴夹角、负荷，研究一体成型与传统制样试样的磨耗变化规律。结果表明：阿克隆磨测试中一体成型试样形变较大，两种试样的阿克隆磨耗量之间存在关联性。该研究可为两种方法阿克隆磨耗对比提供参考。 |
| 英文摘要: |
| Two kinds of Akron samples were prepared by integrated molding and traditional sample preparation method. By changing the hardness of the sample, the angle between the rubber wheel shaft and the grinding wheel shaft, and the load, the wear change laws of the unibody and traditional vulcanization Akron were studied. The results show that the deformation of Akron samples by the integrated forming method are large, there is a correlation between the volume ratio of the two kinds of samples. This comparison method can provide reference for the comparison of two forms of Akron wear.Two types of Akron abrasion specimens were prepared using integrated molding and traditional sampling methods.By changing the hardness of the sample，the angle between the rubber wheel axis and the grinding wheel axis，and the load，the wear variation law of the integrated molding and traditional sample preparation samples was studied.The results indicated that there was a significant deformation in the Akron abrasion test of the integrated sample，and there was a correlation between the Akron abrasion of the two samples.This study could provide reference for comparing Akron wear between the two methods. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
