| 王琳,粟本龙.全钢子午线轮胎花纹与地面的接触特性研究[J].轮胎工业,2021,(6):0359-0363 |
二维码（扫一下试试看！） |
| 全钢子午线轮胎花纹与地面的接触特性研究 |
| Research on Contact Characteristics Between Tread Pattern of All-steel Radial Tire and Ground |
| 投稿时间：2020-08-22 修订日期：2020-09-04 |
| DOI：10.12135/j.issn.1006-8171.2021.06.0359 |
| 中文关键词: 全钢子午线轮胎 胎面花纹 接地压力 有限元仿真 充气压力 负荷 |
| 英文关键词: all-steel radial tire tread pattern contact pressure finite element simulation nflating pressure load |
| 基金项目:山东省重点研发计划项目（2019GGX102051） |
| 中图分类号: |
|
| 摘要点击次数: 1031 |
| 全文下载次数: 777 |
| 中文摘要: |
| 以12R225轮胎为研究对象，建立全花纹全钢子午线轮胎与地面接触的三维非线性有限元仿真模型，研究不同负荷、充气压力和工况下轮胎的接地压力变化规律。结果表明：花纹接地压力分布仿真与实测结果吻合；随负荷增大，接地压力增大且向肩部偏移；充气压力增大；轮胎中心区域接地压力增大；启动、侧偏和转弯等复杂工况对接地压力分布影响显著。 |
| 英文摘要: |
| Taking 12R225 tire as the research object，the three-dimensional nonlinear finite element simulation model of all tread pattern all-steel radial tire contacted with the ground was established，and the variation law of tire contact pressure under different load，inflating pressure and working conditions was studied.The results showed that，the simulated pattern contact pressure distribution was consistent with the test results.With the increase of load，the contact pressure increased and shifted to the shoulder.With the increase of inflating pressure，the contact pressure at the tire center area increased.The complex working conditions such as start-up，sideslip and turning had a significant impact on the contact pressure distribution. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
