| 唐信军,余雷,赵强,朱建阳,高忠吉.半钢子午线轮胎氮气硫化工艺的改进[J].轮胎工业,2021,(9):0572-0574 |
二维码（扫一下试试看！） |
| 半钢子午线轮胎氮气硫化工艺的改进 |
| Improvement of Nitrogen Curing Process for Steel-belted Radial Tire |
| 投稿时间：2020-07-08 修订日期：2020-07-08 |
| DOI： |
| 中文关键词: 半钢子午线轮胎 硫化工艺 高温蒸汽 氮气 硫化程度 成品性能 |
| 英文关键词: steel-belted radial tire curing process high temperature steam nitrogen degree of curing finished tire performance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 796 |
| 全文下载次数: 729 |
| 中文摘要: |
| 在原氮气保压变温硫化工艺的基础上对半钢子午线轮胎的硫化工艺进行改进。结果表明，采用高温蒸汽排放时间分别为12，3和3 s，氮气排放时间为3 s的改进硫化工艺，蒸汽和氮气排凝时间大幅缩短，废气减排显著，轮胎各部位硫化程度符合要求，成品轮胎的高速性能和耐久性能均达到企业标准和国家标准要求。 |
| 英文摘要: |
| The curing process of steel-belted radial tire was improved on the basis of the original nitrogen pressure maintaining and variable temperature cuing process.The results showed that the improved curing process with high-temperature steam emission time of 12，3 and 3 s and nitrogen emission time of 3 s could greatly shorten the steam and nitrogen condensation time，significantly reduce the emission of exhaust gas，and the curing degree of all parts of the tire met the requirements.The high speed performance and durability of the finished tire met the requirements of enterprise standards and national standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
