| 王虹,方之峻.排胶温度和时间对炭黑/白炭黑/偶联剂Si69补强体系硅烷化反应程度和胶料性能的影响[J].轮胎工业,2020,40(8):0495-0498 |
二维码（扫一下试试看！） |
| 排胶温度和时间对炭黑/白炭黑/偶联剂Si69补强体系硅烷化反应程度和胶料性能的影响 |
| Effect of Dumping Temperature and Time on Silanization Reaction Degree and Properties of Compound with Carbon Black/Silica/Coupling Agent Si69 Reinforcement System |
| 投稿时间：2019-09-11 修订日期：2019-09-11 |
| DOI：10.12135/j.issn.1006-8171.2020.08.0495 |
| 中文关键词: 排胶温度 排胶时间 天然橡胶 炭黑 白炭黑 偶联剂Si69 补强体系 硅烷化反应程度 胶料性能 |
| 英文关键词: dumping temperature dumping time natural rubber carbon black silica coupling agent Si69 reinforcement system silanization reaction degree compound property |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1009 |
| 全文下载次数: 817 |
| 中文摘要: |
| 研究排胶温度和时间对炭黑/白炭黑/偶联剂Si69补强体系中白炭黑硅烷化反应程度和胶料性能的影响。结果表明，当排胶温度为155 ℃、排胶时间为280～320 s时，炭黑/白炭黑/偶联剂Si69补强体系混炼胶中白炭黑的硅烷化反应程度最高，填料分散性较好，胶料的综合性能最佳。 |
| 英文摘要: |
| The effects of dumping temperature and time on the silanization reaction degree of silica and properties of compound with carbon black/silica/coupling agent Si69 reinforcement system were studied.The results showed that when the dumping temperature was 155 ℃ and the dumping time was 280～320 s，the silanization reaction degree of silica in compound with carbon black/silica/coupling agent Si69 reinforcement system was the highest，the filler dispersion was better，and the comprehensive properties of the compound was the best. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
