| 高荣彬,黄兆阁,雍占福.基于三维设计软件CATIA的12R22.5全钢载重子午线轮胎的施工设计[J].轮胎工业,2020,40(3):0148-0151 |
二维码（扫一下试试看！） |
| 基于三维设计软件CATIA的12R22.5全钢载重子午线轮胎的施工设计 |
| Construction Design of 12R22.5 Truck and Bus Radial Tire Based on Three-dimensional Design Software CATIA |
| 投稿时间：2018-12-22 修订日期：2018-12-22 |
| DOI：10.12135/j.issn.1006-8171.2020.03.0148 |
| 中文关键词: 全钢载重子午线轮胎 施工设计 三维设计软件 CATIA 花纹 开发成本 |
| 英文关键词: truck and bus radial tire construction design three-dimensional design software CATIA pattern development cost |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1567 |
| 全文下载次数: 884 |
| 中文摘要: |
| 介绍基于三维设计软件CATIA的12R22.5全钢载重子午线轮胎的施工设计。利用CATIA软件进行轮胎花纹绘制和三维造型，求解出轮胎半成品的结构和尺寸，对成型工艺进行设计和控制。利用本方法进行轮胎施工设计具有明显优势，材料分布情况更接近实际，尺寸更准确；施工设计更合理，轮胎合格率和工艺稳定性提高；设计周期缩短，试制次数减少，开发成本降低。 |
| 英文摘要: |
| The construction design of 12R22.5 truck and bus radial tire based on three-dimensional design software CATIA was introduced.The structure and size of semi-finished tire was obtained by using CATIA software to draw the pattern and design the three-dimensional modeling of tire，and the forming process was designed and controlled.The tire construction design using this method had obvious advantages，the material distribution was closer to reality，the size was more accurate，the construction design was more reasonable，the qualification rate of tire and process stability were improved，the design cycle was shortened，the number of trial production was reduced，and the development cost was reduced. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
