| 王建功,黄义钢,王静,王越,张静,李志鹏.石墨烯/废旧轮胎裂解炭黑在半钢子午线轮胎胎面胶中的应用[J].轮胎工业,2019,39(3):0153-0156 |
二维码（扫一下试试看！） |
| 石墨烯/废旧轮胎裂解炭黑在半钢子午线轮胎胎面胶中的应用 |
| Application of Graphene/Pyrolytic Carbon Black from Waste Tires in Tread Compound of Steel-belted Radial Tire |
| 投稿时间：2018-10-08 修订日期：2018-10-08 |
| DOI：10.12135/j.issn.1006-8171.2019.3.153 |
| 中文关键词: 石墨烯 废旧轮胎 裂解炭黑 半钢子午线轮胎 胎面胶 耐磨性能 动态力学性能 |
| 英文关键词: graphene waste tire pyrolytic carbon black steel-belted radial tire tread compound wear resistance dynamic mechanical property |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 942 |
| 全文下载次数: 411 |
| 中文摘要: |
| 研究石墨烯（GE）/废旧轮胎裂解炭黑在半钢子午线轮胎胎面胶中的应用。结果表明：随着GE用量的增大，胶料的焦烧时间缩短，硫化速度减慢，交联密度增大；硫化胶的硬度和定伸应力增大，拉伸强度、拉断伸长率和撕裂强度均先增大后减小，拉断永久变形和回弹值减小，耐磨性能提高，压缩温升和永久变形增大；硫化胶的损耗因子（tanδ）峰值减小，0和60 ℃时的tanδ增大。 |
| 英文摘要: |
| The application of graphene（GE）/pyrolytic carbon black from waste tires in the tread compound of steel-belted radial tire was investigated.The results showed that，as the addition level of GE increased，the scorch time of the compound was shortened，the curing speed decreased and the crosslinking density increased.The hardness and modulus of the vulcanizate increased，the tensile strength，elongation at break and tear strength increased at first and then decreased，the permanent set at break and rebound value decreased，the wear resistance improved，the compression heat build-up and permanent deformation increased，the peak value of loss factor（tanδ） decreased，and the tanδ at 0 and 60 ℃ increased. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
