| 邵先行,张超,王浩,王桂阳.12R22.5 18PR BY908全钢载重子午线驱动轮胎的设计[J].轮胎工业,2019,39(1):0014-0016 |
二维码（扫一下试试看！） |
| 12R22.5 18PR BY908全钢载重子午线驱动轮胎的设计 |
| Design on 12R22.5 18PR BY908 Truck and Bus Radial Driven Tire |
| 投稿时间：2018-09-21 修订日期：2018-09-21 |
| DOI：10.12135/j.issn.1006-8171.2019.01.0014 |
| 中文关键词: 全钢载重子午线轮胎 结构设计 施工设计 |
| 英文关键词: truck and bus radial tire structure design construction design |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1419 |
| 全文下载次数: 424 |
| 中文摘要: |
| 介绍12R22.5 18PR BY908全钢载重子午线驱动轮胎的设计。结构设计：外直径 1 090 mm，断面宽 312 mm，行驶面宽度 250 mm，行驶面弧度高 8 mm，胎圈着合直径 569 mm，胎圈着合宽度 254 mm，断面水平轴位置（ H1/ H2） 0.998 1，胎面花纹为三段式块状变节距花纹，花纹深度 21 mm，花纹周节数 68，花纹饱和度 74.65%。施工设计：胎面采用全分层设计，胎侧采用3复合结构，胎体采用0.17＋5×0.215＋10×0.235CCST钢丝帘线，1#—3#带束层均采用4＋3×0.35ST钢丝帘线，4#带束层采用5×0.35HI钢丝帘线；采用一次法三鼓成型机成型，双模硫化机氮气硫化工艺硫化。成品性能试验结果表明，成品轮胎充气外缘尺寸、强度性能和耐久性能达到国家标准要求。 |
| 英文摘要: |
| The design on 12R22.5 18PR BY908 truck and bus radial driven tire was described.In structure design，the following parameters were taken：overall diameter 1 090 mm，cross-sectional width 312 mm，width of running surface 250 mm，arc height of running surface 8 mm，bead diameter at rim seat 569 mm，bead width at rim seat 254 mm，maximum width position of cross-section（H1/ H2） 0.998 1，
three-stage block-shaped variable pitch for tread pattern，pattern depth 21 mm，number of pattern pitches 68，and block/total ratio 74.65%.In construction design，the following processes were taken：the hierarchical design for tread，three composite structure for sidewall，0.17＋5×0.215＋10×0.235CCST steel cord for carcass ply，4＋3×0.35ST steel cord for 1#—3# belts，5×0.35HI steel cord for 4# belt，and using one stage three drum building machine to build tire and dual-mode vulcanizing machine nitrogen vulcanization process to cure tire.It was confirmed by the tests of the finished tire that，the inflated peripheral dimension，strength performance and endurance met the requirements of national standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
