| 侯丹丹,张娟,王飞.应用有限元分析法解析0°带束层结构[J].轮胎工业,2017,37(3):142-146 |
二维码（扫一下试试看！） |
| 应用有限元分析法解析0°带束层结构 |
| Analysis of 0° Belt Structure by Finite Element Analysis |
| |
| DOI： |
| 中文关键词: 轮胎 有限元分析 带束层 应变 |
| 英文关键词: tire finite element analysis belt strain |
| 基金项目: |
| 中图分类号:TQ336.1；O241.82 |
|
| 摘要点击次数: 855 |
| 全文下载次数: 567 |
| 中文摘要: |
| 利用有限元分析法对影响轮胎破坏产生的应变分量进行分析，对比有无0°带束层结构的伸张情况。结果表明：以第1带束层为起点的破坏延伸第1步是xz方向剪切应变分量作用在带束层端点截面上（非粘合面），钢丝帘线切面和胶料的非粘合界面的空间扩大，破坏开始；第2步是在yz方向剪切应变分量作用下，破坏沿着第1带束层与第2带束层界面开始延伸。0°带束层结构可抑制胎肩和胎冠中心的径向伸张。 |
| 英文摘要: |
| The strain components which caused the tire failure were analyzed by finite element analysis method，and the stretch results of the structures with and without 0° belt were compared.The results showed that the delamination initiation and extension on 1# belt was started from the cross section of belt end (non-adhesive side) under the shear strain component of xz direction，in which the non-adhesive interface between the steel cord cutting edge and rubber compound was expanded.Then the delamination was extended along the interface between the 1# and 2# belts under the action of shear strain component in the yz direction.It was found that 0° belt structure could suppress radial extension of shoulder and tread center. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
