| 刘敏.工程机械斜交轮胎蒸汽/氮气硫化工艺探讨[J].轮胎工业,2019,39(3):0172-0174 |
二维码（扫一下试试看！） |
| 工程机械斜交轮胎蒸汽/氮气硫化工艺探讨 |
| Discussion on Steam/Nitrogen Vulcanization Process for Off-The-Road Bias Tire |
| 投稿时间：2017-08-03 修订日期：2017-08-03 |
| DOI：10.12135/j.issn.1006-8171.2019.03.0172 |
| 中文关键词: 工程机械斜交轮胎 蒸汽/氮气硫化工艺 性能 |
| 英文关键词: off-the-road bias tire steam/nitrogen vulcanization process property |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1018 |
| 全文下载次数: 665 |
| 中文摘要: |
| 对工程机械斜交轮胎蒸汽/氮气硫化工艺进行试验分析。结果表明：与采用过热水硫化工艺相比，采用蒸汽/氮气硫化工艺后，轮胎硫化时间延长，生产效率无明显优势；可节约能源成本但设备改造成本高，投资回收周期长；蒸汽/氮气硫化成品轮胎的物理性能、耐久性能和高速性能无明显变化。 |
| 英文摘要: |
| The steam/nitrogen vulcanization process of the off-the-road bias tire was analyzed.The results showed that，compared with the superheated water vulcanization process，the curing time of the tire was prolonged and the production efficiency had no obvious advantage with the steam/nitrogen vulcanization process.The energy cost was reduced，but the equipment transformation cost was high，and the investment recovery period was long.The physical properties，durability and high-speed performance of steam/nitrogen vulcanized tire had no obvious change. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
