| 姜位文.全地形轮胎设计质量的估算方法[J].轮胎工业,2019,39(3):0136-0139 |
二维码（扫一下试试看！） |
| 全地形轮胎设计质量的估算方法 |
| Estimation Method for Design Quality of All Terrain Vehicle Tire |
| 投稿时间：2017-07-03 修订日期：2017-07-03 |
| DOI：10.12135/j.issn.1006-8171.2019.3.0136 |
| 中文关键词: 全地形轮胎 质量估算 3D模型 胎体 胎面 |
| 英文关键词: all terrain vehicle tire quality estimation 3D model carcass tread |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1017 |
| 全文下载次数: 435 |
| 中文摘要: |
| 分别采用传统工艺设计、计算机2D和3D软件分析以及传统工艺设计和计算机3D软件分析相互结合的方法，对全地形轮胎设计质量进行估算。结果表明：采用各种方法估算的轮胎设计质量与轮胎实际质量相差均不大；传统工艺设计估算对胎体材料计算非常准确，适合试生产前的施工设计；计算机2D软件分析方法最为快速；计算机3D软件分析方法对花纹块计算非常准确，适合与客户直观交流；传统工艺与3D软件分析相结合的方法仅用于分析，不推荐使用。 |
| 英文摘要: |
| The design quality of all terrain vehicle tire was estimated by the methods of the traditional process planning，computer aided analysis of 2D and 3D software and the combination of traditional process planning and computer aided analysis of 3D software.The results showed that，there was little difference between the design quality estimated by various methods and the actual tire quality.The estimation of traditional process design was very accurate for calculation of carcass material，which was suitable for construction design before trial production；the computer 2D software analysis method was the fastest；the computer 3D software analysis method was very accurate for calculation of pattern blocks，which was suitable for direct communication with customers；the method combining traditional process with 3D software analysis was only used for analysis and was not recommended for use. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
