| 董玉德.基于ABAQUS的轮胎滑水仿真分析[J].轮胎工业,2017,37(10): |
|
| 基于ABAQUS的轮胎滑水仿真分析 |
| Analysis of hydroplaning simulation based on ABAQUS |
| 投稿时间：2016-08-25 修订日期：2016-08-25 |
| DOI： |
| 中文关键词: 轮胎花纹 SolidWorks ABAQUS 滑水性能 有限元分析 |
| 英文关键词: tread pattern SolidWorks ABAQUS Hydroplaning performance Finite element analysis |
| 基金项目:国家自然科学基金项目（面上项目，重点项目，重大项目） |
| 中图分类号: |
|
| 摘要点击次数: 1294 |
| 全文下载次数: 405 |
| 中文摘要: |
| 近年来，交通安全部门对车辆行驶安全的要求日益提高，其中轮胎的滑水性能对车辆的行驶安全有极大的影响。本文主要通过SolidWorks建立十二种花纹轮胎的三维模型，导入ABAQUS中生成有限元模型，然后使用基于ABAQUS CEL方法进行轮胎滑水仿真分析。对不同花纹轮胎的滑水性能分别进行了比较。分别比较了四种不同的纵向花纹轮胎，四种不同的横向花纹轮胎以及四种不同的混合花纹轮胎，每一组都得到了相应的位移随速度变化的曲线，并且对其进行分析，并从设计原理上给出了解释。 |
| 英文摘要: |
| In recent years, the requirements of transportation security administration of vehicle driving safety are increasing,
tire hydroplaning performance of vehicle have great influence on driving safety. This paper established twelve 3D tire model of different kinds of tire tread pattern by SolidWorks,and import models in ABAQUS to generate finite element model , then make tire hydroplaning simulation analysis based on ABAQUS CEL method. And also compared the tire Hydroplaning performance of different tire patterns . There are Four different longitudinal tread patterns, four different transverse tread patterns and four kinds of mixed tire patterns , Each group received corresponding displacement versus speed curves, we analyze them and give an explanation from the design principle. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
