| 孙洪沙,谷宁,孟庆伟,张元赞.矿用14.00R25 E-4工程机械子午线轮胎的设计[J].轮胎工业,2015,35(3):146-148 |
二维码（扫一下试试看！） |
| 矿用14.00R25 E-4工程机械子午线轮胎的设计 |
| Design of 14.00R25 E 4 Off-The-Road Radial Tire for Mining |
| |
| DOI： |
| 中文关键词: 工程机械子午线轮胎 结构设计 施工设计 |
| 英文关键词: off-the-road radial tire structure design construction design |
| 基金项目: |
| 中图分类号:U463.341＋.5；TQ336.1＋1 |
|
| 摘要点击次数: 1173 |
| 全文下载次数: 521 |
| 中文摘要: |
| 介绍矿用14.00R25 E 4工程机械子午线轮胎的设计。结构设计：外直径 1 418 mm，断面宽 375 mm，行驶面宽度 320 mm，行驶面弧度高 15 mm，胎圈着合直径 632 mm，胎圈着合宽度 254 mm，断面水平轴位置(H1/H2) 0.9，采用加深牵引块状花纹，花纹深度 36 mm，花纹饱和度 57.8%，花纹周节数 36。施工设计：采用双复合挤出胎面，1#，2#和3#带束层采用3×0.20+6×0.35HT钢丝帘线，4#带束层采用3×7×0.20HE钢丝帘线，胎体采用3+9+15×0.22+0.15钢丝帘线，钢丝圈采用Φ1.65 mm胎圈钢丝，采用一次法成型机成型、硫化机硫化。成品轮胎试验结果表明，轮胎的充气外缘尺寸、物理性能和耐久性能均达到设计和相应国家标准要求。 |
| 英文摘要: |
| The design of 14.00R25 E 4 off-the-road radial tire for mining was described.In the structure design，the following parameters were taken:overall diameter 1 418 mm，cross-sectional width 375 mm，width of running surface 320 mm，arc height of running surface 15 mm，bead diameter at rim seat 632 mm，bead width at rim seat 254 mm，maximum width position of cross-section(H1/H2) 0.9，deepened traction pattern，pattern depth 36 mm，block/total ratio 57.8%，and total number of pitches 36.In the construction design，the following processes were taken：coextruded tread，3×0.20+6×0.35HT steel cord for 1#，2# and 3# belt ply，3×7×0.20HE steel cord for 4# belt ply，3+9+15×0.22+0.15 steel cord for carcass ply，Φ1.65 mm bead wire for bead，using one stage builder to build tires，and using press to cure tires.It was confirmed by the test of finished tires that the peripheral dimension，physical properties and endurance performance met the requirements of corresponding design and national standard. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
