| 李大鹏,马新军,王玉艳.LT245/75R16 120/116S 10PR全路况越野子午线轮胎的设计[J].轮胎工业,2014,34(8):469-472 |
二维码（扫一下试试看！） |
| LT245/75R16 120/116S 10PR全路况越野子午线轮胎的设计 |
| Design of LT245/75R16 120/116S 10PR On/Off-highway Radial Tire |
| |
| DOI： |
| 中文关键词: 全路况越野子午线轮胎 结构设计 施工设计 |
| 英文关键词: on/off-highway radial tire structure design construction design |
| 基金项目: |
| 中图分类号:U463.34+.3/.6 |
|
| 摘要点击次数: 873 |
| 全文下载次数: 388 |
| 中文摘要: |
| 介绍LT245/75R16 120/116S 10PR全路况越野子午线轮胎的设计。结构设计：外直径 771 mm，断面宽 256 mm，行驶面宽度 192 mm，行驶面弧度高 10.2 mm，胎圈着合直径 404.6 mm，胎圈着合宽度 209.6 mm，断面水平轴位置（H1/H2） 1.0，采用无向大花纹块设计，花纹深度 13 mm，花纹饱和度 64%，花纹周节数 32。施工设计：胎面采用三方四块结构，胎体采用2层2200dtex/3聚酯浸胶帘布，带束层采用2层开放型2+7×0.26HT钢丝帘布；采用两次法成型机成型，双模热板式B型硫化机硫化。成品性能试验结果表明，成品轮胎的充气外缘尺寸、强度性能、耐久性能和高速性能均满足相应设计和标准要求。 |
| 英文摘要: |
| The design of LT245/75R16 120/116S 10PR on/off highway radial tire was described.In the structure design，the following parameters were taken：overall diameter 771 mm，cross-sectional width 256 mm，width of running surface 192 mm，height of running surface 10.2 mm，bead diameter at rim seat 404.6 mm，bead width at rim seat 209.6 mm，maximum width position of cross-section （H1/H2） 1.0，big random pattern block，pattern depth 13 mm，block/total ratio 64%，and total number of pitches 32.In the construction design，the following processes were taken：three-formula and four-piece extruded tread，2 layers of 2200dtex/3 polyester cord for carcass ply，2 layers of open-type 2+7×0.26HT steel cord for belt ply；using two-step building machine to build tires，and using type-B curing press to cure tires.It was confirmed by the tests of finished tires that，the inflated peripheral dimension，strength performance，endurance performance and high speed performance met the requirements of the relative design and standard. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
