| 褚国江.轮胎制备用聚乙烯隔离膜的研制[J].轮胎工业,2012,(12):748-749 |
二维码（扫一下试试看！） |
| 轮胎制备用聚乙烯隔离膜的研制 |
| Development of Polyethylene Isolation Film for Tire Production |
| |
| DOI： |
| 中文关键词: 聚乙烯隔离膜 透光率 粘度 |
| 英文关键词: polyethylene isolation film light transmittance viscosity |
| 基金项目: |
| 中图分类号:TQ325.1+ 2 |
|
| 摘要点击次数: 904 |
| 全文下载次数: 27 |
| 中文摘要: |
| 采用三层共挤吹塑工艺研制轮胎制备用聚乙烯（PE）隔离膜。结果表明：当表层高密度聚乙烯与低密度聚乙烯用量比为1∶1，芯层线形低密度聚乙烯、回收造粒料、隔离剂K用量比为100∶40∶2.5，并在各层中均添加3份遮光及抗紫外线母料，吹胀比为1.45～1.55时，PE隔离膜的透光率较小，对轮胎半成品胶片的隔离和保鲜效果较好。 |
| 英文摘要: |
| The polyethylene （PE） isolation film used in tire production was developed by using three-layer blown film extrusion process.The results showed that， when the ratio of high density polyethylene and low density polyethylene in the surface layer was 1∶1，the ratio of low density polyethylene，recycled granulated materials and agent K in the core layer was 100∶40∶2.5， the addition level of opaque and anti ultraviolet masterbatch in each layer was 3 phr， and the blow-up ratio was 1.45～1.55，the produced PE film had low light transmittance and provided good isolation and preservation effect for semi-finished products of tire. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
