文章摘要
陈宏,李花婷,李炜东,马维德,张新军,于国柱.白炭黑对SIBR胶料性能的影响[J].轮胎工业,2005,(3):148-151 本文二维码信息
二维码（扫一下试试看！）
白炭黑对SIBR胶料性能的影响
Effect of silica on properties of SIBR compound
  
DOI：
中文关键词: 集成橡胶  白炭黑  炭黑  胎面胶
英文关键词: SIBR  silica  carbon black  tread
基金项目:
中图分类号:TQ333.99；TQ330.38+3
作者单位
陈宏 北京橡胶工业研究设计院 
李花婷 北京橡胶工业研究设计院 
李炜东 北京橡胶工业研究设计院 
马维德 北京橡胶工业研究设计院 
张新军 北京橡胶工业研究设计院 
于国柱 北京燕山石油化工公司研究院 
摘要点击次数: 1217
全文下载次数: 801
中文摘要:
      研究白炭黑等量替代炭黑对集成橡胶（SIBR）胶料性能的影响。结果表明，白炭黑部分和完全替代炭黑，SIBR硫化胶的耐磨性能改善，0 ℃时的tanδ值增大，60 ℃时的tanδ值减小。用20～30份白炭黑等量替代炭黑，可获得加工性能、综合物理性能、耐磨性能、抗湿滑性能好和滚动阻力小的SIBR胎面胶。
英文摘要:
      The effect of the silica on the properties of SIBR compound by substituting for the same level of carbon black was investigated.The results showed that the abrasion resistance of SIBR vulcanizate improved by substituting the silica for the partial or whole carbon black,and at the same time,tanδ at 0 ℃ increased and tanδ at 60 ℃ decreased.A SIBR tread with better processibility,physical properties,abrasion resistance and wet traction as well as lower rolling resistance was obtained by using 20～30 phr silica instead of the same level of carbon black.
Author NameAffiliation
CHEN Hong Beijing Research and Design Institute of Rubber Industry 
LI Huating Beijing Research and Design Institute of Rubber Industry 
LI Weidong Beijing Research and Design Institute of Rubber Industry 
MA Weide Beijing Research and Design Institute of Rubber Industry 
ZHANG Xinjun Beijing Research and Design Institute of Rubber Industry 
YU Guozhu Research Insititute of Beijing Yanshan Petro-chemical Company 
查看全文   查看/发表评论  下载PDF阅读器
关闭