| 杨世春.13.00-24平地机轮胎的设计及改进[J].轮胎工业,2002,(2):79-81 |
二维码（扫一下试试看！） |
| 13.00-24平地机轮胎的设计及改进 |
| Design and modification of 13.00-24 grader tire |
| |
| DOI： |
| 中文关键词: 平地机轮胎 结构设计 |
| 英文关键词: grader tire structure design |
| 基金项目: |
| 中图分类号:U463.341＋.5 |
|
| 摘要点击次数: 640 |
| 全文下载次数: 517 |
| 中文摘要: |
| 介绍了13.00-24平地机轮胎的结构设计、施工设计及为解决卸胎困难所采取的放大着合直径、减小胎圈宽和调整钢丝圈与胎体帘布层结构等改进措施，经过成品轮胎性能检测及解剖国外样品轮胎进行对比分析，结果表明，改进后既达到了预期效果，又使单胎节约原材料成本98.06元。 |
| 英文摘要: |
| The structure design and const ruction design of grader tire were described.The modifying measures，such as increasing bead diameter at rim seat，decreasing bead width and adjusting structures of bead and carcass ply，were taken to ease the problem in unloading tire.It was found through the comparison between the modified tire and imported tire that the predicted results of modification were obtained，while the material cost was reduced by 98.06 RMB yuan per tire. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
