|
二维码（扫一下试试看！） |
| 聚酰胺56纤维中铜离子含量测定的影响因素分析 |
| Analysis of Influencing Factors for Determination of Copper Ion Content in Polyamide 56 Fiber |
| Received:March 25, 2022 Revised:March 25, 2022 |
| DOI：10.12137/j.issn.2095-5448.2023.01.0044 |
| 中文关键词: 聚酰胺56纤维 铜离子含量 样品制备 溶解条件 萃取 |
| 英文关键词: polyamide 56 fiber copper ion content sample preparation solution condition extraction |
| 基金项目: |
| 中图分类号: |
|
| Hits: 1341 |
| Download times: 503 |
| 中文摘要: |
| 分析样品制备、溶解和萃取的条件及步骤对聚酰胺56纤维中铜离子含量测定结果的影响。试验确定各步骤的优化条件如下：样品事先进行清洗，样品量为0.5～1 g；溶解聚酰胺56纤维的硫酸溶液的浓度为5～7 mol·L-1，溶解温度为50～80 ℃，溶解时间为50 min以上；萃取步骤的搅拌转速为600 r·min-1，采用中号转子，萃取时间为30 min，萃取液静置时间为8 min。以上优化条件下聚酰胺56纤维中铜离子含量测定结果较准确。 |
| 英文摘要: |
| The influence of the conditions and steps of sample preparation，dissolution and extraction on the determination of copper ion content in polyamide 56 fiber was analyzed. The optimization conditions of each step were determined as follows：the sample was cleaned in advance，and the sample amount was 0.5～1 g.The concentration of sulfuric acid solution to dissolve polyamide 56 fiber was 5～7 mol·L-1，the dissolution temperature was 50～80 ℃，and the dissolution time was more than 50 min.The stirring speed of the extraction step was 600 r·min-1，a medium rotor was used，the extraction time was 30 min，and the standing time of the extract was 8 min.The determination results of copper ion content in polyamide 56 fiber under the above optimized conditions were accurate. |
|
View Full Text
View/Add Comment Download reader |
| Close |
