| 吴荣懿.汽车橡胶密封条静电植绒光照老化耐磨性能研究[J].橡胶科技,2019,17(4):0206-0210. |
二维码（扫一下试试看！） |
| 汽车橡胶密封条静电植绒光照老化耐磨性能研究 |
| Study on Abrasion Resistance of Electrostatic Flocking of Automobile Sealing Strip After Light Aging |
| 投稿时间：2019-01-30 修订日期：2019-01-30 |
| DOI：10.12137/j.issn.2095-5448.2019.04.0206 |
| 中文关键词: 汽车橡胶密封条 静电植绒 光照老化 耐磨性能 |
| 英文关键词: automobile sealing strip electrostatic flocking light aging abrasion resistance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 4985 |
| 全文下载次数: 585 |
| 中文摘要: |
| 研究汽车橡胶密封条光照老化后静电植绒耐磨性能的影响因素。根据植绒粘合剂光照老化机理和静电植绒生产工艺，分析植绒前密封条表面温度、Plasma等离子表面处理、粘合剂的厚度、静电植绒环境、粘合剂固化温度等工艺条件对光照老化后植绒耐磨性能的影响。通过调节蠕动泵的出胶量提高植绒粘合剂的干膜厚度，提高两段固化烘箱的温度使密封条表面温度达到180 ℃以上，汽车橡胶密封条植绒光照老化后耐磨性能达到企业标准要求。 |
| 英文摘要: |
| Influence factors of abrasion resistance of electrostatic flocking of automobile sealing strip after light aging was studied.According to light aging mechanism of flocking adhesion agent and electrostatic flocking process，the effect of process conditions including surface temperature of sealing strip before flocking，plasma surface treatment，thickness of adhesion agent，environment of electrostatic flocking and curing temperature of adhesion agent on the abrasion resistance was studied.Thickness of the adhesion agent film could be improved by adjusting the amount of discharged content from peristaltic pump，and surface temperature of sealing strip could exceed 180 ℃ by increasing the temperature of two sections of curing oven.The adhesion resistant of electrostatic flocking of automobile sealing strip after light aging could meet the requirements of enterprise standard. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
