|
二维码（扫一下试试看！） |
| 橡胶衬套电镀锌镍合金层与橡胶粘接工艺改进 |
| Improvement of Bonding Process between Zinc-Nickel Alloy Electroplating Layer and Rubber of Rubber Bushing |
| Received:November 03, 2021 Revised:November 03, 2021 |
| DOI：10.12137/j.issn.2095-5448.2023.03.0139 |
| 中文关键词: 橡胶衬套；电镀；锌镍合金；粘接工艺；预固化；胶粘剂；粘接性能 |
| 英文关键词: rubber bushing；electroplating；zinc-nickel alloy；bonding process；pre-curing；adhesive；bonding property |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | LU Weiqiang* | Ningbo Tuopu Group Co.，Ltd | 36943470@qq.com | | NI Chao | Ningbo Tuopu Group Co.，Ltd | |
|
| Hits: 2157 |
| Download times: 777 |
| 中文摘要: |
| 对橡胶衬套中钢铁件电镀锌镍合金层与橡胶的粘接工艺进行改进，包括对电镀锌镍合金工艺进行优化、喷涂或刷涂较薄的底涂胶粘剂并预固化、喷涂或刷涂较厚的面涂胶粘剂。结果表明：与传统粘接工艺相比，采用改进粘接工艺的电镀锌镍合金层与橡胶的粘接力明显提高，钢铁件表面附胶率达到90%以上，粘接性能大幅提高。 |
| 英文摘要: |
| The bonding process of the zinc-nickel alloy electroplating layer of the steel parts and the rubber in the rubber bushing was improved，including optimizing the zinc-nickel alloy electroplating process，spraying or brushing a thinner primer adhesive and pre-curing，spraying or brushing a thicker surface coating adhesive.The results showed that compared with the traditional bonding process，the adhesion between the zinc-nickel alloy electroplating layer and rubber with the improved bonding process was obviously improved.The rubber coverage rate on the surface of steel parts reached more than 90%，and the bonding property was greatly improved. |
|
View Full Text
View/Add Comment Download reader |
| Close |
