|
二维码（扫一下试试看！） |
| Moldflow软件对轿车水箱盖注射成型模具温度的优化 |
| Optimization of Injection Molding Temperature of Water Tank Cover by Software Moldflow |
| |
| DOI： |
| 中文关键词: 橡胶注射成型；Moldflow软件；轿车水箱盖；模具温度；体积固化率 |
| 英文关键词: rubber injection molding； Moldflow； water tank cover of passenger car； die temperature； volume curing rate |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | | Niu Jiateng | School of Electromechanical Engineering，Qingdao University of Science and Technology | | Zhang Huimin | School of Electromechanical Engineering，Qingdao University of Science and Technology | | Tang Yue | School of Electromechanical Engineering，Qingdao University of Science and Technology |
|
| Hits: 1667 |
| Download times: 926 |
| 中文摘要: |
| 用Moldflow软件优化轿车水箱盖注射成型的模具温度。结果表明：模具温度在175 ℃时，胶料充模时间短，充模结束时的体积固化率小，充模后35 s时的体积固化率大。Moldflow软件可以优化橡胶制品的注射成型工艺，缩短工艺和模具设计周期，提高生产效率和产品质量。 |
| 英文摘要: |
| In this study，the injection molding temperature of water tank cover for passenger car was optimized using Moldlfow.The results showed that，when the mold temperature was set at 175 ℃，the injection time was short，the volume curing rate at the end of injection was low，and the volume curing rate after 35 s was high.Moldflow was effective software to optimize rubber injection molding process，shorten the process and mold design cycle，and improve production efficiency and product quality. |
|
View Full Text
View/Add Comment Download reader |
| Close |
