| 姚雪梅.12R22.5轻量化驱动轮胎的设计[J].橡胶科技,2020,18(9):0524-0526. |
二维码（扫一下试试看！） |
| 12R22.5轻量化驱动轮胎的设计 |
| Design of 12R22.5 Lightweight Driving Tire |
| 投稿时间：2020-04-16 修订日期：2020-04-16 |
| DOI：10.12137/j.issn.2095-5448.2020.09.0524 |
| 中文关键词: 轻量化 驱动轮胎 结构设计 施工设计 |
| 英文关键词: lightweight driving tire structure design construction design |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1410 |
| 全文下载次数: 16 |
| 中文摘要: |
| 介绍12R22.5轻量化驱动轮胎的设计。结构设计：外直径?1 082 mm，断面宽?300 mm，行驶面宽度?237 mm，行驶面弧度高?8 mm，胎圈着合直径?570 mm，胎圈着合宽度?240 mm，断面水平轴位置（H1/H2）?0.987，花纹深度?21 mm，花纹饱和度?78.5%。施工设计：胎面采用两方两块结构，胎体采用3×0.24/9×0.225CCST钢丝帘线，1#和2#带束层采用3×0.20＋6×0.35HT钢丝帘线，3#带束层采用5×0.35HI钢丝帘线，0°带束层采用3×7×0.20HE钢丝帘线，胎体安全倍数、带束层安全倍数、胎圈安全倍数均符合设计要求；采用一次法成型机成型和热板硫化机硫化。成品轮胎试验结果表明：轮胎充气外缘尺寸、强度性能和耐久性能均达到国家标准要求，且质量小于同规格驱动轮胎。 |
| 英文摘要: |
| The design of 12R22.5 lightweight driving tires was introduced.In the structure design，the following parameters were taken：overall diameter?1 082 mm，cross-sectional width?300 mm，width of running surface?237 mm，arc height of running surface?8 mm，bead diameter at rim seat?570 mm，bead width at rim seat?240 mm，maximum width position of cross-section（H1/H2）?0.987，pattern depth?21 mm，block/total ratio?78.5%.In the construction design，using two-formula and two-piece tread，3×0.24/9×0.225CCST steel cord for carcass，3×0.20＋6×0.35HT steel cord for 1# and 2# belt，5×0.35HI steel cord for 3# belt and 3×7×0.20HE steel cord for 0° belt.The safety factors of the carcass，belt and bead all met the design requirements.Using one-stage building machine to build tires and hot platen vulcanizing press to cure tires.The test results of the finished tire showed that，the inflated peripheral dimension，strength and endurance performance met the requirements of national standards，and the tire was lighter than other driving tires of the same size. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
