| 王胜利,郑志宽,贾永军.硫化机精度对全钢载重子午线轮胎外观质量的影响及改善措施[J].橡胶科技,2023,21(3):0146-0148. |
二维码（扫一下试试看！） |
| 硫化机精度对全钢载重子午线轮胎外观质量的影响及改善措施 |
| Effect of Accuracy of Curing Press on Appearance Quality of Truck and Bus Radial Tire and Improvement Measures |
| 投稿时间：2022-01-19 修订日期：2022-01-19 |
| DOI：10.12137/j.issn.2095-5448.2023.03.0146 |
| 中文关键词: 全钢载重子午线轮胎 硫化机 平行度 垂直度 同轴度 精度 改善措施 |
| 英文关键词: truck and bus radial tire curing press parallelism verticality coaxiality accuracy improvement measures |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1309 |
| 全文下载次数: 367 |
| 中文摘要: |
| 研究硫化机精度对全钢载重子午线轮胎外观质量的影响，提出相应的改善措施。硫化机平行度、垂直度和同轴度精度不达标易导致成品轮胎出现胎圈大边、钢丝圈上抽和胎圈露线等外观缺陷，提高硫化机精度可以降低成品轮胎外观缺陷率。 |
| 英文摘要: |
| The effect of accuracy of curing press on appearance quality of truck and bus radial tire was studied，and corresponding improvement measures were put forward.Failure to meet the standards for the parallelism，verticality and coaxiality accuracy of the curing press would lead to appearance defects of the finished tire such as big bead，bead pull-up and bead steel wire exposure.Improving the accuracy of the curing press could reduce the appearance defect rate of the finished tires. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
