| 王欢,侯礼华,史利娜,丁小朋,杨燕.钢丝帘布小角度裁断常见缺陷的原因分析及改善措施[J].橡胶科技,2022,20(12):0610-0613. |
二维码（扫一下试试看！） |
| 钢丝帘布小角度裁断常见缺陷的原因分析及改善措施 |
| Cause Analysis and Countermeasures of Common Defects in Small Angle Cutting of Steel Wire Cord |
| 投稿时间：2021-09-28 修订日期：2021-09-28 |
| DOI：10.12137/j.issn.2095-5448.2022.12.0610 |
| 中文关键词: 钢丝帘布 小角度裁断 缺陷 大头小尾 接头 |
| 英文关键词: steel wire cord small angle cutting defect big head and small tail joint |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1088 |
| 全文下载次数: 409 |
| 中文摘要: |
| 介绍轮胎钢丝帘布小角度裁断常见缺陷的原因及改善措施。钢丝帘布小角度裁断常见缺陷主要有大头小尾、接头错接、接头压钢丝和卷取打褶。通过提升钢丝帘布压延质量和裁断设备精度，可有效降低钢丝帘布小角度裁断缺陷的发生率，在一定程度提升了轮胎半成品质量。 |
| 英文摘要: |
| The causes and countermeasures of common defects in small angle cutting of tire steel wire cord were introduced.The common defects in small angle cutting of steel wire cord mainly included big head and small tail，joint mismatch，joint pressing steel wire and coiling bending.By improving the rolling quality of steel wire cord and the accuracy of cutting equipment，the recurrence frequency of small angle cutting defects of steel wire cord could be effectively reduced，and the quality of semi-finished products of tire could be improved to a certain extent. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
