| 彭立群,林达文,王进,周鹏.橡胶金属牵引组件纵向刚度的试验设计与研究[J].橡胶科技,2020,18(2):0081-0086. |
二维码（扫一下试试看！） |
| 橡胶金属牵引组件纵向刚度的试验设计与研究 |
| Experimental Design and Research of Longitudinal Stiffness of Rubber Metal Traction Components |
| 投稿时间：2019-10-09 修订日期：2019-10-09 |
| DOI：10.12137/j.issn.2095-5448.2020.02.0081 |
| 中文关键词: 橡胶 牵引组件 纵向刚度 径向刚度 试验设计 |
| 英文关键词: rubber traction component longitudinal stiffness radial stiffness test design |
| 基金项目:湖南省科技创新计划项目：轨道交通装备关键科技研究及创新平台建设（ 2017XK2203） |
| 中图分类号: |
|
| 摘要点击次数: 1815 |
| 全文下载次数: 5 |
| 中文摘要: |
| 设计一种橡胶金属牵引组件纵向刚度的新型试验方案，研究不同测量方式和加载方式对刚度测试结果的影响。结果表明：单边加载方式测量的刚度大于正反加载方式，打表测试的刚度大于系统测试；试验方案设计合理，满足试验要求，且能准确反映牵引组件纵向刚度，对牵引组件及同类产品的研发和试验有一定指导作用。 |
| 英文摘要: |
| A new test program for the longitudinal stiffness of rubber metal traction components was designed，the effect of different measurement methods and loading methods on the stiffness test results was studied.The results showed that the stiffness measured by single side loading was higher than that of positive and negative loading，and the stiffness measured by dial gauge measured was higher than that of system testing.The design of test program was reasonable，meeting the test requirements，and could accurately reflect the longitudinal stiffness of traction components，which could guide the development and test of traction components and similar products. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
