| 王仁平.纳米粘土替代炭黑在丁苯橡胶中的应用[J].橡胶科技,2019,17(10):0575-0578. |
二维码（扫一下试试看！） |
| 纳米粘土替代炭黑在丁苯橡胶中的应用 |
| Application of Nano-clay Instead of Carbon Black in Styrene Butadiene Rubber |
| 投稿时间：2019-06-12 修订日期：2019-06-12 |
| DOI：10.12137/j.issn.2095-5448.2019.10.0575 |
| 中文关键词: 纳米粘土 炭黑 丁苯橡胶 加工性能 物理性能 |
| 英文关键词: nano-clay carbon black SBR processability physical property |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1072 |
| 全文下载次数: 361 |
| 中文摘要: |
| 研究纳米粘土部分替代炭黑N234和炭黑N660对丁苯橡胶（SBR）胶料性能的影响。结果表明：在胶料中加入适量纳米粘土替代炭黑能改善胶料的加工性能，对加工安全性和硫化速度影响不大；用7.5份纳米粘土F100替代5份炭黑N234或10～15份纳米粘土KTC替代10份炭黑N234时，补强效果较好；纳米粘土KTC等量替代炭黑N660时的适宜用量为5～10份，用量超过15份时应增量替代。 |
| 英文摘要: |
| The effect of partially replacing carbon black N234 and N660 with nano-clay on the properties of SBR compound was investigated.The results showed that，adding suitable amount of nano-clay instead of carbon black could improve the processability of the compound，and had little effect on the processing safety and vulcanization rate.When 5 phr carbon black N234 was replaced by 7.5 phr nano-clay F100 or 10 phr carbon black N234 was replaced by 10～15 phr nano-clay KTC，the reinforcing effect was better.The appropriate dosage of nano-clay KTC for carbon black N660 was 5～10 phr，and it should be incrementally replaced when the dosage exceeded 15 phr. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
