文章摘要
王秀梅,宫金荣,隋斌,王传志,邢正涛,高兴鹏.425/65R22. 5矿山用宽基全钢载重 子午线轮胎的设计[J].橡胶科技,2019,17(9):0506-0510. 本文二维码信息
二维码(扫一下试试看!)
425/65R22. 5矿山用宽基全钢载重 子午线轮胎的设计
Design on 425/65R22. 5 Wide-base Truck and Bus Tire for Mine
投稿时间:2019-04-13  修订日期:2019-04-13
DOI:10.12137/j.issn.2095-5448.2019.09.0506
中文关键词: 矿山用轮胎  全钢载重子午线轮胎  结构设计  施工设计
英文关键词: tire for mine  truck and bus tire  structure design  construction design
基金项目:
中图分类号:
作者单位E-mail
王秀梅* 青岛双星轮胎工业有限公司 山东 青岛 266400 wangxiumeilyac@163.com 
宫金荣 青岛双星轮胎工业有限公司 山东 青岛 266400  
隋斌 青岛双星轮胎工业有限公司 山东 青岛 266400  
王传志 青岛双星轮胎工业有限公司 山东 青岛 266400  
邢正涛 青岛双星轮胎工业有限公司 山东 青岛 266400  
高兴鹏 青岛双星轮胎工业有限公司 山东 青岛 266400  
摘要点击次数: 1325
全文下载次数: 388
中文摘要:
      介绍矿山用425/65R22. 5宽基全钢载重子午线轮胎的设计。结构设计:外直径 1 126 mm,断面宽 441 mm,行驶面宽度 356mm,行驶面弧度高 14. 5mm,胎圈着合直径 569. 4mm,胎圈着合宽度 355 mm,断面水平轴位置(H1/H2) 1. 002,采用横向大块曲折花纹沟设计,花纹深度 24 mm,花纹饱和度 62%,花纹周节数 33。施工设 计:胎面采用大分层加贴缓冲胶片设计;胎体采用3+9+15×0. 20ST钢丝帘线;带束层采用3层加0°结构设计,1#和2#带束层采用3+9+15×0. 22+0. 15NT钢丝帘线,3#带束层采用5×0. 30HI钢丝帘线,0°带束层采用3×7×0. 20HE钢丝帘线;采用一次法成型机成型,1 651 mm(65英寸)热板式硫化机硫化。成品性能试验结果表明,成品轮胎的充气外缘尺寸、强度性能和耐久性能均达到相应设计和国家标准要求。
英文摘要:
      The design on 425/65R22. 5 wide-base truck and bus tire for mine was described. In the structure design,the following parameters were taken:overall diameter 1 126 mm,cross-sectional width  441 mm,width of running surface 356 mm,arc height of running surface 14. 5,bead diameter at rim seat 569. 4 mm,bead width at rim seat 355,maximum width position of cross-section(H1/H2) 1. 002,the large transverse zigzag pattern groove design for tread,pattern depth 24 mm,block/total ratio 62%,and number of pattern pitches 33. In the construction design,the following processes were taken:large layered cushioning film for tread,3 + 9 + 15×0. 20ST steel cord for carcass,the belt layer designed with 3 layers plus 0° structure design,3+9+15×0. 22+0. 15NT steel cord for 1# and 2# belt layers,5×0. 30HI steel cord for 3# belt layer,3×7×0. 20HE steel cord for 0° belt layer;using one-time buliding machine to bulid tire,and 1 651 mm(65 inch) hot plate curing press to cure tire. It was confirmed by the finished tire test that,the inflated perpheral dimension,strength property and durability met the requirements of design and national standards.
Author NameAffiliationE-mail
WangXiuMei Qingdao Doublestar Tire Industrial Co.Ltd wangxiumeilyac@163.com 
GongJinRong Qingdao Doublestar Tire Industrial Co.Ltd  
SuiBin Qingdao Doublestar Tire Industrial Co.Ltd  
WangChuanZhi Qingdao Doublestar Tire Industrial Co.Ltd  
XingZhengTao Qingdao Doublestar Tire Industrial Co.Ltd  
GaoXingPeng Qingdao Doublestar Tire Industrial Co.Ltd  
查看全文   查看/发表评论  下载PDF阅读器