文章摘要
邱劲东.混炼型耐磨聚氨酯橡胶的配方设计[J].橡胶科技,2018,16(11):27-30. 本文二维码信息
二维码（扫一下试试看！）
混炼型耐磨聚氨酯橡胶的配方设计
Formulation Design of Wear Resistant Millable Polyurethane Rubber
  
DOI：
中文关键词: 混炼型  聚醚型  聚氨酯橡胶  耐磨性能  配方设计
英文关键词: millable type  polyether type  polyurethane rubber  wear resistance  formulation design
基金项目:
中图分类号:TQ334. 1；TQ330. 6＋1
作者单位
邱劲东 东莞华工佛塑新材料有限公司 
摘要点击次数: 805
全文下载次数: 0
中文摘要:
      进行混炼型耐磨聚氨酯橡胶的配方设计。结果表明，采用聚醚型聚氨酯橡胶UR101为主体材料，加入20份炭黑N220或气相法白炭黑，添加适当的硅烷偶联剂、防老剂和碳纳米管等，可得到综合性能良好的硫化胶，其DIN磨耗量可低至30～40 mm3。
英文摘要:
      The formulation of wear resistant millable polyurethane rubber was developed in this study.The experimental testing results showed that，when polyether urethane rubber UR101 was used as main material，20 phr of carbon black N220 or fumed silica was used as reinforcing material，and appropriate amounts of silane coupling agent，antioxidant and carbon nanotubes were added in the formulation，the DIN wear loss of the compound reached as low as 30 ～ 40 mm3 and comprehensive properties of the compound were good.
Author NameAffiliation
QIU Jindong Dongguan Huagong Fosu New Material Co. ，Ltd 
查看全文   查看/发表评论  下载PDF阅读器