| 林娟颖,刘晓颖,蔡伯阳.用有限元分析软件Abaqus模拟子午线轮胎胎侧裂口扩展情况[J].橡胶科技,2017,15(4):20-24. |
二维码（扫一下试试看！） |
| 用有限元分析软件Abaqus模拟子午线轮胎胎侧裂口扩展情况 |
| Simulation of Crack Propagation of Radial Tire Sidewall by Finite Element Analysis Software Abaqus |
| |
| DOI： |
| 中文关键词: 子午线轮胎 胎侧 裂口 有限元分析 Abaqus J积分 |
| 英文关键词: radial tire sidewall crack finite element analysis abaqus J integral |
| 基金项目:福建省青年基金资助项目（2017J05006）；泉州市科技项目（2014Z115）；华侨大学科研启动基金资助项目（11BS412）；华侨大学研究生科研创新能力培育计划资助项目（1511303044） |
| 中图分类号:TQ336.1；O242.21 |
|
| 摘要点击次数: 633 |
| 全文下载次数: 280 |
| 中文摘要: |
| 用有限元分析软件Abaqus模拟分析不同胎压下子午线轮胎胎侧裂口的扩展情况。结果表明：随着胎压增大，J积分最大值增大；当胎压较小时，J积分最大值出现在裂口尖端方向0°附近，J积分最大值近似线性增长；当胎压较大时，裂口扩展方向发生变化，J积分最大值的增长速度明显放缓并趋于极值。 |
| 英文摘要: |
| The crack propagation of radial tire sidewall under different tire pressures was simulated by finite element analysis software Abaqus.The results showed that as the tire pressure increased，the maximum value of J integral increased.When the tire pressure was low，the maximum value of J integral appeared near the direction of the crack tip 0° and the maximum value of J integral increased approximately linearly.When the tire pressure was high，the crack propagation direction changed，and the growth rate of the J integral value slowed down and J integral value tended to the extreme value. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
