顺丁橡胶/丁苯橡胶并用发泡材料的制备及性能研究 |
Preparation and Performance of BR/SBR Foaming Materials |
投稿时间:2018-07-26 修订日期:2018-07-26 |
DOI:10.12136/j.issn.1000-890X.2019.04.0275 |
中文关键词: 顺丁橡胶 丁苯橡胶 发泡材料 硫化工艺 动静刚度比 减震性能 |
英文关键词: BR SBR foaming material curing process dynamic and static stiffness ratio shock absorption property |
基金项目: |
|
摘要点击次数: 1198 |
全文下载次数: 445 |
中文摘要: |
研究硫黄和发泡剂OBSH-75用量及预硫化工艺对顺丁橡胶/丁苯橡胶并用发泡材料性能的影响。结果表明:添加2份硫黄和3份发泡剂的发泡材料的泡孔直径较小、泡孔均匀且为闭孔结构,动静刚度比较小,物理性能和减震性能较好;预硫化温度为125 ℃、预硫化时间为14 min时,发泡材料的泡孔密度适中,动静刚度比较小,减震性能较好。 |
英文摘要: |
The effects of the amount of sulfur and foaming agent OBSH-75,and the pre-curing process on the properties of butadiene rubber(BR)/styrene-butadiene rubber(SBR) foaming materials were investigated. The results showed that the cell diameter of the foaming materials with 2 phr sulfur and 3 phr foaming agent was smaller,the cell was uniform with closed structure,the dynamic and static stiffness ratio was smaller,and the physical properties and shock absorption property were better. When the pre-curing temperature and pre-curing time were 125 ℃ and 14 min,respectively,the cell density of the foaming materials was moderate,the dynamic and static stiffness ratio was small,and the shock absorption property was good. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |