文章摘要
本文二维码信息
二维码(扫一下试试看!)
乳液共混法制备白炭黑/乳聚丁苯橡胶复合材料及其性能研究
Preparation and Properties of Silica/ESBR Composites by Emulsion Blending Method
Received:October 22, 2018  Revised:October 22, 2018
DOI:10.12135/j.issn.1006-8171.2020.03.0155
中文关键词: 白炭黑;改性;乳聚丁苯橡胶;乳液共混法;破乳;拉伸性能;耐磨性能;抗湿滑性能
英文关键词: silica;modification;ESBR;emulsion blending method;demulsification;tensile property;wear resistance;wet skid resistance
基金项目:
中图分类号:
Author NameAffiliationE-mail
YANG Weibin Qingdao university of science and technology xiaoyao875@qq.com 
SU Juqiao GUI ZHOU TYRE CO.LTD sujuqiao@gtc.com.cn 
Hits: 237
Download times: 5
中文摘要:
      采用乳液共混法制备白炭黑/乳聚丁苯橡胶(ESBR)复合材料,研究ESBR胶乳破乳的影响因素、机理和动力学过程以及复合材料性能。结果表明:添加白炭黑或改性白炭黑的ESBR胶乳使用饱和氯化钠溶液的破乳效果改善;ESBR胶乳的絮凝程度随着饱和氯化钠溶液用量的增大而增大,破乳后期破乳速率迅速增大;破乳机理是以无机粒子为吸附中心的熵减最小化;乳液共混法制备的白炭黑/ESBR复合材料的拉伸强度比传统机械共混法制备的白炭黑/ESBR复合材料降低,耐磨性能不具优势,但低温抗湿滑性能明显改善。
英文摘要:
      The silica/ESBR composites were prepared by emulsion blending method,the factors affecting the demulsification of ESBR latex,mechanism and kinetics process as well as the properties of the composites were studied.The results showed that,the demulsification effect of ESBR latex filled with silica or modified silica was improved by using saturated ESBR.The flocculation degree of ESBR latex increased with the increase of saturated ESBR dosage,and the demulsification rate increased rapidly at the later stage of demulsification.The demulsification mechanism was the minimization of entropy reduction with inorganic particles as the adsorption center.The silica/ESBR composite prepared by emulsion blending method possesed lower tensile strength than that of the silica/ESBR composite prepared by the traditional mechanical blending method,and the wear resistance was not superior,but the low temperature wet sliding resistance was improved obviously.
View Full Text   View/Add Comment  Download reader
Close